|
• POLYCOMPOSITE CONSTRUCTION |
| |
This rugged compound makes the door impervious to moisture. The smooth, high quality finish makes painting optional. |
| • TOUGH DOUBLE-WALL PANELS |
| |
They are a single extrusion for strength. |
| • HORIZONTAL REINFORCEMENT WEBS |
 |
| |
They add to the door's strength, and are spaced to accommodate all standard TODCO hardware. |
| • 40% STRONGER RIVETS |
| |
Specially designed rivets grip tight and stay secure. Tests show they increas mandrel head retention by 40%. |
| • MINIMAL THRU RIVETS |
| |
The door has a smooth surface for an automotive quality paint finish and/or excellent decal adhesion. Only bottom panel hardware use thru rivets. |
| • TIGHT-FITTING PANEL JOINTS |
| |
They form a better water barrier than tongue-and-groove joints. Also designed for maximum pinch protection. |
| • WATERSHED JOINT CONFIGURATION |
|
| |
The joints are designed to force water flow downward, while keeping door panels properly aligned and rigid. |
| • RUBBER SIDE AND BOTTOM SEALS STANDARD |
| |
Provide increased weather protection. |
| • THREE ROWS OF CENTER HINGES |
| |
Standard on panels 73" or wider. |
| • STANDARD TWO-LIP BOTTOM SEAL |
| |
Provides increased weather protection. |
| • ADJUSTABLE TOP FIXTURES & RUBBER HEAD SEAL |
| |
Provide tight seal at top of door. |
| • 7x19 STAINLESS STEEL CABLES |
| |
Are aircraft quality. |
| • SINGLE COUNTERBALANCE SPRING |
| |
Door operation is almost effortless. |